Navegando por Autor "Holanda, Romildo Morant de"

Agora exibindo 1 - 9 de 9

Aspectos legais e socioambientais da mariscagem e estudo de caso para o município de Igarassu no estado de Pernambuco, Brasil
(2023-09-13) Silva, Fabiana Augusto da; Holanda, Romildo Morant de; http://lattes.cnpq.br/4283130448063981; http://lattes.cnpq.br/6418193409038549
The extraction of shellfish on the Brazilian coast, especially on the northeastern coast, is considered traditional, where this culture permeates generations of family members. At the same time that the shellfishing activity is carried out, the shells resulting from the activity are discarded improperly, generating an environmental liability with environmental impacts in the small, medium and long term, forcing the need to implement a shellfish management plan. activity, from logistics for transporting workers, to processing the product obtained and the waste generated. The objective of this research was to survey the needs of shellfish gatherers with regard to carrying out their daily activities, with the aim of proposing the implementation and use of a basic unit of the container type to process their products, promoting good practices in hygiene and safety. The research was carried out between the months of August 2019 and February 2020, in the region of Canal de Santa Cruz, municipality of Igarassu - Pernambuco, and a bibliographical review survey focused on the problem pointed out in the research. Visits to the location, image recording and data collection were carried out with the aid of a questionnaire, where the shellfish gatherers pointed out some of their main needs during work.
Avaliação de desempenho ambiental de lavanderias de beneficiamento têxtil em Caruaru
(2017) Fonseca, Agnes Camila Nascimento da; Holanda, Romildo Morant de; http://lattes.cnpq.br/4283130448063981; http://lattes.cnpq.br/7674860445423851
Avaliação de desempenho ambiental de lavanderias de beneficiamento têxtil em Caruaru – PE
(2017) Fonseca, Agnes Camila Nascimento da; Holanda, Romildo Morant de; http://lattes.cnpq.br/4283130448063981; http://lattes.cnpq.br/7674860445423851
Critérios de sustentabilidade em obras públicas: estudo de caso obra da Unidade Acadêmica do Cabo de Santo Agostinho – UFRPE
(2018-08-15) Albuquerque, Eduardo Vinícius Rodrigues de; Holanda, Romildo Morant de; http://lattes.cnpq.br/4283130448063981; http://lattes.cnpq.br/0245055532217724
Estudo do comportamento mecânico de argamassas de revestimento com substituição parcial do agregado miúdo por lodo têxtil gerado pela lavanderia industrial de jeans do arranjo produtivo local de confecções do Agreste pernambucano
(2024-09-30) Brito, Eyshila Paloma Costa de; Holanda, Romildo Morant de; http://lattes.cnpq.br/4283130448063981; http://lattes.cnpq.br/0065466719471642
The local productive arrangement (APL), located in the Agreste region of Pernambuco, is the second largest textile hub in Brazil, producing, making and selling garments. The activities carried out in the region range from the manufacturing process to the processing of jeans, which is carried out in industrial laundries. As with any industrial procedure, laundries are major generators of waste, with textile sludge being one of the main ones, generated in large volumes. It is a potential pollutant capable of compromising soil, water and air quality, directly affecting the health and well-being of the population. On the other hand, the construction industry continues to be one of the biggest consumers of natural resources, mainly through the use of sand to make concrete and mortar. This research studied the incorporation of jeans laundry sludge, at levels of 10%, 20% and 25%, into mortar mixes for coatings, with the aim of providing a more sustainable destination for the sludge, as well as serving as an alternative raw material. The research aimed to study the mechanical behavior of modified mortars in order to evaluate their physical and mechanical properties after partially incorporating the waste in relation to the fine aggregate (sand). Tests were carried out on the particle size composition, unit mass and specific mass of the waste, as well as the characterization of the textile sludge. As the waste partially replaced the fine aggregate, the same tests were carried out on the sand. Although the sand and sludge had different particle size curves, both were within the usable zone for fine aggregate. Sludge had a unit mass 45% lower than that of sand. The specific mass of silt was also lower than that of sand, totaling 1.62 g/cm³ and 2.63 g/cm³, respectively. When evaluating the mechanical strength of the specimens, there was little variation between the different mixes, but the mortar with 10% sludge incorporation had the highest compressive strength and flexural tensile strength when compared to the others. In the water absorption and capillarity coefficient results, the residue was able to effectively fill the small pores in the mixture. Finally, it was possible to classify the mortars studied, which achieved minimum values for the characteristics of compressive strength, flexural tensile strength and capillarity coefficient, receiving the designation P3, R1, C1 in the four types.
Ferramentas da qualidade aplicados à gestão ambiental
(EDUFRPE, 2017) Holanda, Romildo Morant de; Bezerra, Ana Paula Xavier de Gondra; Lorena, Emmanuelle Maria Gonçalves; Santos, Ítala Gabriela Sobral dos
Esse livro visa demonstrar que às ferramentas da qualidade podem auxiliar na gestão ambiental de forma prática, como também visa contribuir na formação acadêmica dos estudantes dos cursos de engenharias e áreas afins. Em conjunto a isso, contribuir com os profissionais da área ambiental nas soluções dos problemas ambientais com aplicação de ferramentas da qualidade. O capitulo 1 apresenta os aspectos conceituais de qualidade e como ocorreu o surgimento deste ao longo da história industrial e como vem se consolidando no setor da qualidade nas empresas. O capitulo 2 refere-se às 7 ferramentas utilizadas na gestão da qualidade empresarial, que vai desde do seu surgimento até a sua aplicabilidade na área ambiental. O capítulo 3 trata sobre as ferramentas e técnicas complementares de como utilizá-las para auxiliar as 7 ferramentas da qualidade abordadas no capitulo anterior, focado na área ambiental. O capitulo 4 explana a utilização das ferramentas da qualidade para atender os requisitos da norma ISO 14.001:2015. Esse livro ainda contempla, no apêndice, algumas atividades práticas para o entendimento das ferramentas da qualidade aplicadas na área ambiental. (Texto extraído da apresentação do livro).
O gerenciamento ambiental através da ECOPERE Consultoria Ambiental em empresas privadas
(2022) Freitas, Maria Clara de Morais; Holanda, Romildo Morant de; http://lattes.cnpq.br/4283130448063981; http://lattes.cnpq.br/1408898012317705
Modelo de avaliação de desempenho ambiental em indústriade cerâmica vermelha em Pernambuco
(2018) Falcão, Symone Maria Pancracio; Holanda, Romildo Morant de; http://lattes.cnpq.br/4283130448063981; http://lattes.cnpq.br/2647767989447545
A utilização da ferramenta PDCA na gestão de uma empresa de tratamento e destinação de REEE – estudo de caso Recife
(2021-03-09) Maciel Júnior, Manoel Ferreira; Holanda, Romildo Morant de; http://lattes.cnpq.br/4283130448063981; http://lattes.cnpq.br/4283130448063981
The present work is related with electronics waste (EWA) treatment and disposal. The generation speed of this kind of waste, on a worldwide scale, is in the order of 20 to 25 million tons a year. This result is a concern of environmental preservation agencies. As these waste ware potentially contaminants, in large proportions, of biotic systems in soil, water and air. The case study uses the tool Plan-Do-Check-Act (PDCA), developed by Walter Andrew Shewart, having two distinct periods of foundation, 1931 and 1939, through his books: Economic Control of Quality of Manufactured Product, and Statistical Method from the Viewpoint of Quality Control. This tool was suggested for the referenced company in order to optimize the operationalization of treatment and disposal of the EWA. Thus enable the speed of transformation into economically and environmentally viable by-products. Although far below the generation speed of these kind of waste. In the specific case of Brazil there is the National Solid Waste Policy (NSWP) associated with the law 12.305/2010, in force. Arising from the decree 10.240/2020, the reverse logistics of electronics products becomes mandatory Nationwide with due legal protection, and with the use of the PDCA tool, implemented in the electronics waste treatment and disposal company, there is a perspective of continuous improvement. The result of optimized management and legal provisions generates the mitigation of large-scale environmental impacts. Noting that the physical and Chemical components of electronics are extremely harmful to all natural resources, therefore, it is necessary to pay careful attention to environmental public policies.